Advanced Material Specialty Inc. (2020)
No.18, Kegong 2nd Rd.
64064 Douliu City, Yunlin County,
- Automotive industry
- Building and construction
- Electronics / electrics
- Aircraft and aerospace
- Commercial vehicle
- Solar energy
Advanced Material Specialty Inc. acts a technology leader in this field of Taiwan, we specialize in producing aluminum alloy tube for few decades and we were accredited by AS9100 and ISO9001:2015.
Our main mass production are listed as below for your reference:
a.) Bicycle parts such as suspension fork tube, handle bar, seat post, chain wheel, frame tube and rims, etc.
b.) Outdoor Sporting equipment such as octagonal tube for lacrosse shaft, oval tube for ice axe shaft, and baseball bat.
c.) Extrusion profile for sea sink, and bar for fall protection…etc.
d.) Now we also dedicated in developing the techniques in automotive, aerospace and other industries.
Below are the mechanical properties of our products:
A800Sc TS 752MPa, YS 716MPa, El. 8%
A600Sc TS 735MPa, YS 700MPa, El. 8%
7250 TS 720MPa, YS 680MPa, El. 12%
7150 TS >590MPa, YS>544MPa, El. >9%
7050 TS >537MPa, YS>462MPa, El. >9%
6069 TS 403MPa, YS 369MPa, El. 9.8%
2014 TS 450MPa, YS 386MPa, El. 8%
6061 TS >280MPa, YS>270MPa, El. >10%
※ The testing data will be different based on different specifications.
Please refer the attachment for more detail or visit our website https://www.amspec-inc.com/index.html to have a further understanding.
We believe you’ll be satisfied with our high quality products and good service if you’re searching for a reliable supplier.
High precision aluminum alloy drawing tube
Due to the demand for high strength aluminum alloy seamless tubes for bicycle fork and baseball bats, AMSpec's technical team established the 7050-T76...
Due to the demand for high strength aluminum alloy seamless tubes for bicycle fork and baseball bats, AMSpec's technical team established the 7050-T76 strength class seamless tubes production technology in 2008, quickly followed by higher strength and fracture toughness of 7150-T7x and T6x alloys thus achieving industry’s top level of fatigue resistance. Also we greatly improved both bending deformation and impact resistance in 7055, 7068 class material.
To optimize alloy design, micro-alloys incorporating elements are also under development. The following 7250, A600Sc, A800Sc alloys that optimized by AMSpec, can have reached tensile strengths of 700MPa or above. We make these high strength aluminum alloys by using highly purified casting techniques, addition of micro-refined elements and supersaturated alloy modification to achieve the target of ultra-high strength.
Aluminum alloy Profiles
The aim of our continuous efforts is to develop the extrusion technology that can modify the extrusion parameters to achieve the uniform microstructure of...
The aim of our continuous efforts is to develop the extrusion technology that can modify the extrusion parameters to achieve the uniform microstructure of extruded profiles at the condition of isothermal extrusion.
Coupled with the appropriate mold design to increase its dimensional precision and improve the strength after heat treatment, is the main reason for our progress in this area. In currently product development, it tends to small size and thin thickness products, the typical examples are 3003 MPE(Micro Port Extrusion) and 6000 series bicycle rims.