Ausstellerdetails

Extend your die life with nitrogen

Nitrogen can be used to inert the extrusion surface in die shrouding and take heat away from the tooling -resulting in reduced scrap rates and in increase in pounds processed before a die change is required.

Keeping extruded aluminium profiles within a desired temperature range while increasing process speed can increase production rate significantly. Depending on the extruded alloy, inerting nitrogen can be introduced into the extrusion process, removing oxygen to improve surface quality and brightness and acting as a cooling agent for the die.

Benefits that nitrogen shrouding could bring to your process:

• Protect the extrusion surface from oxidation
• Improve surface quality
• Increase extrusion rates
• Optimise nitrogen use
• Increase die lifetime
• Remove pick ups
• Makes painting and anodizing of profile easier

Contact us to help you optimise nitrogen performance in your extrusion process.

Transient Heating Oxy-fuel burner

The Transient Heating burner is the only smart burner technology in the world using a sensor-driven control strategy to direct energy down toward the melt, sequentially to all four quadrants of your reverb furnace. You get more even heating throughout the furnace, eliminate cold zones, and maximize melt rates.

Our innovative, new Transient Heating burner delivers:

• Up to 40% increased productivity
• Up to 40% improved fuel efficiency
• Up to 20% higher metal yield

Ready to fire up your reverb furnace to boost performance and your bottom line?

To learn more about the Air Products Transient Heating burner visit www.airproducts.com/transient.